Ambient Light Component
The ambient light component (plAmbientLightComponent) lights every object in the scene with a constant light from all around, so that no area is ever entirely black. It uses two colours: TopColor for light from above (the sky) and BottomColor for light from below (light bounced off the ground). Surfaces facing sideways get a mix of both.
The image below shows a scene without indirect light on the left, with a sky light in the middle and with ambient light on the right.

The ambient light is a scene-wide setting: a scene uses one. It has no position, range or shadows, does not move with its object, and costs nothing per pixel beyond the sky lighting that every scene evaluates.
Use it sparingly. In most scenes a sky light component is the better choice: it takes its light from the actual sky, lights objects from six directions instead of two, and also provides reflections. A sky light replaces the ambient light's contribution; use one or the other. With ray-traced global illumination on, the ambient light's constant term is not simply added on top: ambient occlusion darkens it, and with screen-probe GI and sky occlusion (the default) its light only arrives through GI rays that escape the scene. Interiors therefore stay dark even with a bright ambient light; that is intended, as GI provides the bounce light.
Brightness
The ambient light is not in a photometric unit. The colours times Intensity are the brightness, in nits, of a white surface lit by it from that side: with the defaults, a white floor reflects about 0.2 nits. That is visible in a dim night scene (EV100 around 0) but invisible at a daylight exposure of EV100 15. Raise Intensity to match your scene's exposure (see Physical Light Units), and keep the result low compared to the direct light, or the scene looks flat and washed out.
Component Properties
| Property | Default | Description |
|---|---|---|
TopColor | dark blue-grey (0.2, 0.2, 0.3) | Light from above, for surfaces facing up. |
BottomColor | darker blue-grey (0.1, 0.1, 0.15) | Light from below, for surfaces facing down. Usually darker than TopColor, like light bounced off the ground. |
Intensity | 1 | Multiplier for both colours. |